News and Updates – LAANC Drone Program Expansion Continues

WASHINGTON The Federal Aviation Administration (FAA) today announced two important expansions of the Low Altitude Authorization and Capability (LAANC), which automates the application and approval process for drone operators to obtain airspace authorizations.

Four airports Baltimore/Washington International Thurgood Marshall Airport, Dulles International Airport, William P. Hobby Airport in Houston and Newark Liberty International Airport joined the list of approximately 400 air traffic facilities covering about 600 airports where LAANC is available.

Access to the service is provided through one of the FAA-approved UAS Service Suppliers. The seven companies listed below are the latest to enter into partnerships with the agency, bringing the total to 21.

  • Airspacelink
  • Avision
  • Botlink
  • Collins Aerospace
  • Drone Up
  • Simulyze
  • Skygrid

LAANC, a collaboration between the FAA and the Unmanned Aircraft Systems (UAS) industry that directly supports the safe integration ofUAS into the nations airspace, expedites the time it takes for drone pilots to receive authorizations to fly under 400 feet in controlled airspace. The service is accessible to all pilots who operate under theFAAs small drone rule(Part 107).

LAANC began as a prototype in 2017. To date, there have been more than 170,000 approved authorizations through LAANC. The program was expanded in July to provide near real-time airspace authorizations to recreational flyers.

The programs continued expansion further increases the ability of drone pilots to gain safe and efficient access to controlled airspace nationwide.

For updates to LAANC capabilities, visit our website.

News and Updates – FAA Issues Denver Environmental Assessment

WASHINGTON The Federal Aviation Administration (FAA) has issued a Final Environmental Assessment (EA) for the Denver Metroplex project.

Before the FAA makes a final decision on the project, the agency will hold a 32-day public comment period. This will allow people to comment on the changes made in the Final EA compared to the Draft EA, and on any of the preliminary determinations under Section 106 of the National Historic Preservation Act.

The project would use cutting-edge satellite navigation to move air traffic more safely and efficiently through the area. Satellite-based routes would allow for more direct and efficient routing of aircraft into and out of Denver and surrounding airports, enhancing aviation safety and efficiency, and potentially reducing flight delays.

The project also would expand the number of entry and exit points into and out of the Denver airspace, by segregating Denver arrival traffic from satellite airport traffic and creating additional departure routes, similar to creating more on- and off-ramps in the sky. The project includes two major airports, Denver International Airport and Centennial Airport, and three satellite airports Rocky Mountain Metropolitan Airport, Northern Colorado Regional Airport and Greeley-Weld County Airport.

Prior to issuing the Final EA, the FAA held a total of 24 public workshops in 2017 and in the spring of 2019, conducted approximately 78 briefings for community groups, airport officials, and local, state and federal officials. The agency also evaluated and responded to 518 public comments.

The public is invited to submit comments by mail, or via the web comment form available online throughout the comment period.

Electronic copies of the Final EA and supporting materials, including all Section 106 materials, are available at the following locations:

  • Online at the Project website.
  • Electronic versions of the Final EA have been sent to 78 libraries in the General Study Area with a request to make the digital document available to patrons. A complete list of libraries with electronic copies of the Final EA is available online at the Project website.

News and Updates – FAA Seeks Comments on Draft Environmental Assessment for Las Vegas Metroplex Project

WASHINGTON-The Federal Aviation Administration (FAA) is seeking public comment on the Draft Environmental Assessment (Draft EA) for the Las Vegas Metroplex Project, which proposes to use cutting-edge satellite navigation to move air traffic more efficiently through Southern Nevada.

While the airspace around Las Vegas is already safe, its not as efficient as it could be. The FAA proposes to address the inefficiencies by implementing new routes that are more direct, automatically separated from each other, and have efficient climb and descent profiles. The potential benefits of these routes can include reductions in pilot-controller communications, miles flown, fuel burn and CO2 emissions.

The project includes new and replacement arrival and departure routes for McCarran International Airport, Henderson Executive Airport and North Las Vegas Airport.

The FAA released the projects Draft EA on Nov.18 for public review. There will be a 32-day public comment period on the document from Nov.18 through Dec. 20, 2019.

The document is posted on the Las Vegas Metroplex website. The Draft EA indicates the project would not have any significant environmental impacts under federal environmental law.

Also available on the website are Google Earth images that allow people to compare current and proposed routes, and see the noise analysis the FAA conducted at more than 172,000 grid points throughout the project General Study Area.

The FAA will host five public workshops for the Draft EA between Monday, Dec. 9 and Friday, Dec. 13, 2019. The workshops will feature informational videos and display boards that show existing and proposed routes and explain the inefficiencies in the current system. FAA representatives will be available to answer questions and demonstrate the Google Earth features.

The workshops will be open-house format, where people can attend any time during the posted times to learn about the project. Free parking will be available at all locations.

The workshop dates and locations are as follows:

Dec. 9, 2019
5:00 p.m. 7:30 p.m.
Clark County Government Center Pueblo Room
500 S. Grand Central Pkwy., Las Vegas, NV 89155

Dec. 10, 2019
5:00 p.m. 7:30 p.m.
North Las Vegas Airport Grand Canyon Conference Room
2730 Airport Drive, North Las Vegas, NV 89032

Dec. 11, 2019
5:00 p.m. 7:30 p.m.
Desert Breeze Community Center Meeting Room
8275 Spring Mountain Road, Las Vegas, NV 89147

Dec. 12, 2019
4:45 p.m. 7:15 p.m.
Windmill Library Meeting Room
7060 Windmill Lane, Las Vegas, NV 89113

Dec. 13, 2019
5:00 p.m. 7:30 p.m.
Henderson Executive Airport North/South Meeting Room
3500 Executive Terminal Drive, Henderson, NV 89052

People can submit comments on the project online at 9-las-metroplex-ea@faa.gov, in person at the public workshops, and by writing to:

Las Vegas Metroplex Draft EA Federal Aviation Administration
Western Service CenterOperations Support Group
2200 S. 216th Street
Des Moines, WA 98198-6547

After evaluating and responding to all substantive public comments, the FAA could adopt the entire proposal, adopt portions of it, or modify it.

Additional information about the project, including previous public outreach activities, is available on the FAAs Las Vegas Community Involvement website.

Speech – Safety Through Integrity, Innovation and People

Administrator Stephen Dickson
Washington, DC

Remarks As Delivered

Introduction

Thank you for that kind introduction, Paul. Its good to be here at the Washington Aero Club among so many friends and colleagues. You know, Im a bit embarrassed to say this, but this is the first time Ive been to a Washington Aero Club luncheon, despite being in the aviation business for 40 years. It wasnt anything deliberate on my part, even though there are many familiar faces hereits just that our paths never crossed at this venue. Actually, truth be told, somebody told me you have to give up your outside the Beltway membership card if you come to one of these, so thats why I stayed away.

Im also thrilled to be here today to see Carl receive the Engen Trophy. As you all know, Carl is the epitome of a public servant, and hes passionate about aviation. We at the FAA are better because of him, and the American public has benefited greatly from Carls leadership and dedication. It is a great privilege to have the opportunity to work with him, and call him colleague and friend. Congratulations, Carl.

Its hard not to be passionate about an industry that makes our world smaller. Aviation fundamentally redefines geographic boundaries, provides tremendous economic opportunities, and connecting people and cultures in ways that were unimaginable not too long ago. And I know the people in this room- regardless of differences in perspectives and experiences–share a common bond–a love for aviation. We also share a commitment to enhancing the benefits aviation offers our citizens today, as well as the promise it holds to connect the world in the decades ahead.

Thats why Im herebecause I love aviation, and I love people. Its a privilege to lead. Ive discovered great people at the FAA, and as you might imagine Im getting a lot of advice about how to run the place. Now, some of that advice has been more helpful than other advice has. But seriously, its already been a rewarding adventure.

Background

Now I know youre probably asking yourself, Why did you do it, Steve? Why become FAA Administrator? Several people asked me the same question when I was going through the confirmation process. One of those people was my wife, who also questioned my sanity at several points along the way. The FAA was actually an unplanned diversion from our original flight plan. I was looking for what the next thing would be after my military and airline career. My wife thought it would be retirement.

But when Secretary Chao called me and asked if Id consider leading the FAA, I said Id be interested in talking about it. FAA Administrator is not something you aspire to or even contemplate, but if I could help make a difference, I could think of no better way to serve my country in a way that allows me to use my passion for flying and my four decades of experience in the aviation industry. I am both humbled and grateful that I have the chance to lead the FAA at this historic–and challenging–time. But challenges create opportunities, dont they?

My experience includes flying F-15 fighters in our Air Force and 27 years at Delta Air Lines. At Delta, I flew as a line pilot for the first nine years of my career, eventually qualifying on the B727, B737, B757, B767 and A320 series aircraft. The last 12 years I served as the Senior Vice President of Flight Operations.

During a visit to an aviation high school last month, one of the students asked me my favorite plane to fly during my airline career. I said I liked them all, but my favorite big jet is the 757. But Im also fond of the 727, where I started out as a flight engineer. Even though I was qualified as a fighter pilot, the most difficult training program I ever completed was as a flight engineer trainee in the 727 at Delta. On that airplane the flight engineer was the system integrator, and you had to really have a detailed understanding of every system on the aircraft. Sitting down in front of the engineer panel was something very foreign for a single-seat fighter pilot. Early in training, staring at the banks of amber indicator lights on the panel while figuring out what to doif a student hesitated the instructors would joke that you were sitting there getting a suntan.

But it was a great way to learn about airline operations. The way the cockpit was laid out, the flight engineer was always working with the flight attendants, working customer service issues, working with the captain on checklists, all the time gaining valuable insight into how the captain was managing the flight deck and making decisions.

As SVP of flight ops, I was responsible for the safety and operational performance of the companys global flight operations of more than a million flights a year on six continents, as well as pilot training, crew resources, crew scheduling and regulatory compliance. That job made me understand this simple fact: regardless of change, increasing complexity or competition– safety always has to remain the focus and bedrock of our industry.

So now three months into my job here at the FAA, let me share a few observations. Ill start out by saying I feel a little like that new-hire flight engineera lot experience, but a completely new environment and a lot to learn!

The MAX

Not surprisingly, Ive been in a lot of conversations about the Boeing 737 MAX.

On behalf of everyone at the FAA, I would like to, once again, extend our deepest sympathy and condolences to the families of the victims of the Ethiopian Airlines and Lion Air accidents. Many nations, including the United States, had citizens on those flights. Deputy Administrator Dan Elwell and I have met with the family members and friends of those onboard. Each time we meet, we see their pain, their loss, and it reaffirms the seriousness with which we must approach safety every single day. We want our citizens and our own families to have confidence in the aviation system when they travel. These accidents should not have happened. That is why we, as regulators and operators, work so hard in our jobs every day.

I will tell you this, and if you dont remember anything else I say today, please remember this: I am absolutely committed to honoring the memory of those who lost their lives, by working tirelesslyeach and every day of my tenureto ensure the highest possible margin of safety in the global aviation system. We will never rest. We can always find ways to improve. We can always do better. Safety is a journey, not a destinationa journey we undertake each and every day with humility and a focus on continuous improvement.

Ive said this before but will continue to repeat it: the FAAs return-to-service decision for the MAX will be based solely on our assessment of the sufficiency of Boeings proposed software updates and pilot training that addresses the known issues for grounding the aircraft. We are not delegating anything. When we finally take the decision to return this aircraft to service, it will be the most scrutinized aircraft in history. It will also be one of the safest machines to ever take to the sky. I am not going to sign off on this aircraft until I fly it myself and am satisfied that I would put my own family on it without a second thought.

As both Dan and I have said, we welcome scrutiny and feedback on how we can improve our processes. Several independent reviews have been undertaken of the 737 MAX and the FAAs certification and delegation processes. The first to be completed was one we commissionedasking 9 other authorities to join us in the Joint Authorities Technical Review (JATR) to assess the Boeing 737 MAX flight control system certification. Never before have 10 authorities come together to conduct a review of this sort. And I want to emphasize that we invited this probing review by our peer regulators. That is the FAA at its best. We welcome the JATRs recommendations, and I appreciate their thorough review and hard work.

We also created a Technical Advisory Board, or TAB, made up of FAA Chief Scientists and experts from the U.S. Air Force, Volpe National Transportation Systems Center, and NASA. The TABs job is to conduct an independent review of the proposed integrated system, training, and continued operational safety determination for the 737 MAX. The TAB recently briefed members of Congress and myself on their progress and status of Boeings and the FAAs response to the Return to Service action items.

Work also continues on the Department of Transportations IG audit of the 737 MAX certification, as well as congressional investigations. And we welcome the recent recommendations issued by the NTSB. Finally, we are also awaiting a report from the Secretarys Special Committee on aircraft certification. This blue-ribbon panel was established earlier this year to advise and provide recommendations to the Department on policy-level topics related to certification across the manufacturer spectrum.

Willingness to accept critique is a sign of humility and transparency. It is also a strength. I have seen this firsthand as Ive met our regulatory counterparts around the world. They appreciate and value US leadership. They understand that by working together, we will all be better and raise the bar on global aviation safety.

Going forward beyond the MAX, some key themes are emerging regarding aircraft certification processes not only in the US, but around the world. I am committed to addressing each of these issues. They include:

  • moving toward a more holistic versus transactional, item-by-item approach to aircraft certification;
  • integrating human factors considerations more effectively throughout the design process, as aircraft become more automated and systems more complex;
  • ensuring coordinated and flexible information flow during the oversight process.

An Exciting Time

While attention has been rightfully focused on the 737MAX, we are also focused on integrating innovative new entrants into the NAS. If youve been watching your FAA Twitter, Facebook and Instagram feeds, youve certainly seen the boom in the unmanned aircraft and commercial space sectors.

Weve already registered about 1.5 million small drones, about 400,000 of which are for commercial purposes, and weve approved two Part 135 drone operators. As a point of reference for how fast this industry is moving, the FAA and its predecessors have been registering manned aircraft for 92 years, and after only four years of registering drones, weve got four times as many on the books.

UPS and FedEx are actively participating in trials to speed up the delivery of small packages and working on type certificates for small autonomous drones. Innovators up in Alaska are looking to do the same with much larger vehicles. We are learning a great deal about the innovative ways that drones can help society through our Integration Pilot Program, which Secretary Chao launched two years ago. Our strategy of operations first, is allowing us to use the existing regulatory regime, which helps us ensure innovation can drive forward. Said another way, over the last 3 years, weve shifted from writing rules to getting machines in the air and flyingand taking lessons learned from the operations approval process to write better rules. The vision is to integrate, rather than segregate, UAS into the NAS.

Through the Integration Pilot Program, we are partnering with 9 state, local and tribal governments and industry to inform UAS regulations, policy and guidance by learning from practical applications. Perhaps more importantly, these efforts have become the match that is lighting a creative fire in the industry and for what this novel new form of transportation might achieve.

Flying taxisaka urban air mobilityare on the horizon and chomping at the bit to begin airspace testing. According to the FAA UAS team, we are currently engaged with the builders of more than 15 electric vertical takeoff and landing aircraft projects.

Airframers are eyeing a potential renaissance in supersonic civil aircraft and startup civil space companies are looking to connect New York and Shanghai in less than 40 minutes. Commercial space launch activity has ramped up tenfold in just a few years. Just yesterday we saw a successful FAA-licensed and certified commercial space launch, which deployed 60 communications satellites to low Earth orbit.

Life-saving automation technologies are coming to smaller and smaller aircraft. Late last month, a prominent avionics maker unveiled a new product development that highlights the promise. In a nutshell, if the pilot of a small plane equipped with this technology becomes incapacitated, the passengers now have a chance. They push a button on the panel, and the automation takes over and lands the plane at the nearest suitable airport. Imagine that!

All of this is exciting. As the regulator, we must find ways to operate ahead of the rate of change of the industry. This will require us to improve continuously and avoid bureaucratic inertia. We have to leverage our collective experience without allowing the attitude of weve always done it that way to be an obstacle.

Safety First

So how do we reconcile incredibly bright and innovative minds and fast-moving technologies with a reinvigorated regulatory agency that wants and needs innovation, but at the same time maintains safety as its North Star?

We do it by sticking to our core values of safety, through integrity, innovation and people. And I see our strategy coalescing around four themes:

  • Big data;
  • Just culture;
  • Global leadership; and
  • People.

Big Data: We must continue leaning into our role as a data-driven, risk-based decision-making oversight organization that prioritizes safety above all else.We do that by breaking down silos between organizations and implementing Safety Management Systems supported by compliance programs. We look at the aviation ecosystem as a whole, including how all the parts interact: aircraft, pilots, engineers, flight attendants, technicians, mechanics, dispatchers, air traffic controllerseveryone and everything in the operating environment.

Just Culture: In addition to the technical work required for truly integrated data, a key enabler of a data-driven safety organization is a healthy reporting culture. A good safety culture produces the data you need to figure out whats really happening. If we know about safety risks and we know where threats are coming from and how errors are occurring, we can mitigate the risks and fix the processes that led to those errors. A good safety culture demands that we infuse that safety data into all of our processes from top to bottomin a continuous loop.

To be successful, a safety organization relies on a Just Culture that places great value on front-line employees and those involved in the operation raising and reporting safety concerns in a timely, systematic way, without fearing retaliation. That requires that a Just Culture starts at the top. Its something leadership has to nurture and support. Employees have to see the results, see what the data is showing, how the agency or company is using analysis tools to identify risks and errors and put actions in place to mitigate them.

From the perspective of an operations leader at an airline, Safety Management Systems allowed us to find out about issues and put preventative measures in place before an accident or incident occurs. Of course, there were certain actions that were out of bounds for example, if someone intentionally violated a rule. But if someone made an honest mistake, we would put corrective actions in place to make sure we addressed the issues systemically. Sometimes, it might involve retraining a crew, but in those cases where the data indicated a trend, the corrective actions often involved modifications to processes, procedures, policies or training.

Global Leadership: When you think about how far aviation has come in a little more than a centuryfrom the barnstorming days to a safety record that is the envy of all modes of transportationits hard to argue the value of these safety tools and the importance of the FAAs leadership. Today, the U.S. aviation system is the safest, most dynamic and innovative in the world, and we have the numbers to prove it. This is largely due to these collaborative approaches to safety championed by the FAA and by many of the people in this room. Last Friday I spent some time out at MITRE with the ASIAS (Aviation Safety Information And Sharing) team. ASIAS is one of the crown jewels of the aviation safety system in the United States. It is unique in the world. This is an example of the kind of collaboration and safety innovation we can use to lead the global aviation safety system to even higher levels of performance. By working with and mentoring other authorities around the world, we will work to ensure we meet the publics expectations of the highest possible levels of safety globally, even in areas we dont regulate directly. Over the years the FAA has done more than any other organization around the world to promote and develop global aviation safety. We have an opportunity to do even more. We will do more.

Think about why you are here. At our core, we are all about working together to increase the margin of safety, because without that, we have nothing.

Maintaining the highest levels of safety, while adapting to technological advancements, is a key part of that success for all of us, here and around the world. Without safety as a foundation, we cannot have a vibrant aviation industry in any country, much less between countries. As it is, our international air transportation network is a tightly woven fabric that is dependent on all of us making safety our core value.

People: That brings me to my final pointpeople. We live in an exciting time in aviation, with new emerging technologies and capabilities. Ive told some that this might be the most exciting time in aviation since the introduction of the jet engine or maybe even all the way back to the DC-3. But at its core, a huge technical operations and regulatory agency like the FAA is made of peoplepeople who are driven to serve, people with families, hopes and dreams, people who want satisfying and fulfilling careers. I have the utmost respect for the job that they do every day, making sure our skies are safe and that the operation of the system is as efficientand serves the publicas well as it possibly can. Its now time to show that next generation of aviation leaders what incredible opportunities lie ahead for them in our field, both personally and professionally. It is the people who will innovate and collaborate to take us to the next level of safety, operational excellence and opportunity.

Conclusion

Aviations hard lessons and the industrys hard work have paved the way to creating a global aviation system with an enviable safety record. But as I said earlier, safety is a journey, not a destination. What we have done in the past and what we are doing now will not be good enough in the future. We must build on the lessons learned, and we must never allow ourselves to become complacent.

Those lessons teach us that in order to prevent the next accident from happening, we have to look at the overall aviation system and how all the pieces interact. If we dont do this and instead focus on a single factor, we will miss opportunities to improve our margin of safety.

That will require truly integrated data, enterprise-wide. When our dataand our organizationsare kept in silos, we may miss information that could provide an opportunity to make important safety decisions that will improve processes or even prevent accidents entirely. We have to be constantly learning from each other regulator and those we regulateto help each other improve. Thats the only way the system is going to get better.

We at the FAA are prepared to take the lead in this new phase of system safety, a task we approach with a spirit of humility and openness. Thats a strength we have as a country. We will lead. We have to.

Thank you for your time and hospitality today. I look forward to serving and getting to know the Aero Club and its members much better in the coming years. Its great to be with youeven if were inside the Beltway!

News and Updates – FAA and NASA Drone Industry Workshop

WASHINGTONThe Federal Aviation Administration (FAA) and NASA will hold the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Pilot Program (UPP) Phase 2 Industry Workshop in December. Building on UPP Phase 1, UPP Phase 2 will showcase additional technologies, including Remote Identification (ID) and operations with increasing volumes and density. The UPPs success is dependent upon the ability to work with industry, various FAA Test Sites and IPP participants.

What: FAA/NASA UTM Pilot Program Phase 2 December Industry Workshop

When: Monday, December 9, 2019, 1:00 p.m.5:00 p.m. Pacific Standard Time

Where: NASA Ames Conference Center, Mountain View, CA

During this half-day workshop, the FAA and NASA will provide participants with an in-depth view of UPP Phase 2, including a walk-through of the Concept of Use, Architecture, Technical and Functional Requirements, and a detailed timeline. UPP Phase 2 partners should be able to support the following capabilities:

  • UAS operations in high density airspace;
  • Remote ID services;
  • USS transmission of flight information to air traffic control due to an off-nominal UTM event;
  • Public safety operations; and,
  • UAS Volume Reservations (UVR) service.

Those interested in more details surrounding the agencies plan for partnering with industry for UPP can go to the registration website.

Registration will be on a first-come, first-served basis and limited to the first 150 registrants. Only two participants from the same organization may register. The registration deadlines are:

  • Tuesday, November 12 for non-U.S. citizens without permanent residency. NASA requires special paperwork to admit all non-U.S. citizens without permanent residency to attend the workshop at Ames Research Center.
  • Monday, November 25 for U.S. citizens and permanent residents; Please go to the registration website for more information.

For any questions on the workshop, email: FAAUTM@FAA.gov.